The ring road in the Gumushane province with a length of 11.25 km, which regulates the traffic in the city of Gumushane, was opened by the President of the Republic of Turkey, Recep Tayyip Erdogan. The electromechanical works of the Gümüşhane highway, which is 17 km long, 9 tunnels, 13 bridges… read more

MC Sistem completed the construction of power supply systems for the Socar Administration Building in the Aliaga area of ​​Izmir. The systems of medium voltage, low voltage, generator, transformer, cabling and other building systems have been completed by MC Sistem on a turnkey basis. It is planned… read more

The Sabuncubeli Tunnel was opened to traffic by Prime Minister Binali YILDIRIM at a ceremony held on June 10, 2018. The construction of the tunnel with a length of 4,130 meters and consisting of 2 tubes was constructed by the Izmir Insaat Partnership, and the turnkey electromechanical work was completed… read more

As Yüngül İnşaat Sanayi ve Ticaret A.Ş is the main contractor of  Erzincan Çağlayan Intersection Underpass, Electric, Lighting , Traffic and Control systems were completed and put in traffic by MC Sistem, on November 6th, 2017.  read more

MC Sistem signed Kuwait International Airport T4 Support Terminal Control and Security Systems Agreement with Cengiz İnşaat. Kuwait International Airport is designed to have 55.000 m2 indoor area and has 200.000 m2 outdoor area and annual 4.5 million passenger capacities. Under Scope of the Agreement… read more

MC Sistem has signed  Dudullu Bostancı Metro Line, Control and Communication System turnkey Contract with Şenbay Kolin Kalyon İş Ortaklığı. Metro line has 14,2 km length with 13 stations and 1 depot area. MC Sistem undertakes turnkey solutions for Radio System,IP/MPLS Transmission System,… read more

President of Turkish Republic, Recep Tayyip Erdoğan has surveyed our productions at Ovit worksite. Ovit Tunnel, which is the longest at Turkey and third longest tunnel in the World, productions continues at full speed.  While the construction is carried by Cengiz İnşaat as the Main contractor,… read more

MC Sistem has begun Electromechanics production of TEM and Yonca Tunnels, in scope of Sabiha Gökçen Runway Extension Project. After second Runway installation to Sabiha Gökçen Airport, airplane and passenger volume will increase significantly. Electromechanical Works agreement… read more

Electromechanical assignments of T2’s and T3’s tunnels, which are located on Ordu Topçam Devletyolu, are finished and put into service by MC Sistem on 24.11.2016, while KANYON İnşaat was the main contractor. MC Sistem successfully implemented electrical, lighting, traffic control… read more

Mutu Tunnels, which are located on Erzincan Erzurum state road, has been put into service on 19.12.2016. While Tunnels’ main construction has been undertaken by Özdemir İnşaat, electromechanical works has been completed by MC Sistem. Bidirectional duplex tube tunnels’ electric, lighting,… read more

MC Sistem has signed an agreement upon electromechanics assignments of Malatya Airport Maintenance Shed and Siirt Airport Apron Construction. While TAI is the main contractor of the project, Unitek takes the responsibility of being turnkey contracter. Project's electromechanical responsibility… read more

Electrical, lighting, traffic and control systems works of Erzincan Gendarmerie Junction underpass whose construction was performed by Yüngül İnşaat Sanayi ve Ticaret A.Ş. were completed on December 26, 2015 by MC Sistem. The underpass was opened to the traffic on the same day. read more

MC System signed a turnkey contract with “LİMAK Inşaat” for Gali Zakho Tunnel Electromechanical Works. 2x2 lane road tunnel connects Duhok City to the town Zakho located in the north-west of Duhok. Tunnel passes through the mountain and consists of two 3,590-meter tube. Gali Zakho Tunnel… read more

MC System signed a turnkey contract with “ÖZGÜN Inşaat” for Naciria Tunnel Electromechanical Works. Naciria Tunnel is located on the railway line between Thenia thiz-Ouzou in Algeria. The tunnel is 1516 meters length and has advanced electromechanical systems. Electromechanical… read more

MC System, gothas started to develop NRTH-100C Signalization System consisting of an electronic interlocking and generic practical CTC software. System to be developed will provide safe train operation by eliminating human errors and making it impossible for the determination of the erroneous path dispatchers… read more